oreomy.blogg.se

Difference between rejex high gloss protective finish
Difference between rejex high gloss protective finish















when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenatiously to wheels, etc.).

difference between rejex high gloss protective finish

While it it not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g.The higher the humidity, the faster RejeX cures. Allow RejeX to cure for 8-12 hours out of the elements.

difference between rejex high gloss protective finish

Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily. After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth.On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F.This highly durable coating produces a deep, lustrous shine that outlasts other products by months. The product dries water clear, and unlike wax-based products, never yellows. RejeX also provides exceptional UV protection. RejeX has a higher refractive index than any wax, so it produces richer, deeper looking colors. This very thin film, only tenths of a micron thick, reduces adhesion of all common contaminants such as road grime, exhaust, oil, bug splats, bird droppings, brake dust, tree sap, pollen, tar and grease.

difference between rejex high gloss protective finish

The product dries water clear, and unlike wax-based products, never yellows. This highly durable coating produces a deep, lustrous shine that outlasts other products by months. RejeX has a higher refractive index than any wax, so it produces richer, deeper looking colors. RejeX is commonly used as a paint sealant providing a better performing alternative to wax-type products for owners who want to maximize protection and shine on vehicles of all sorts, including aircraft, cars, motorcycles, boats and RVs. Abrasive cleaners, polishes, rubbing compounds and some chemical paint strippers can remove RejeX.RejeX® is a proprietary thin film polymer coating technology designed to provide a high-gloss / ultra-high-release surface. As already stated, RejeX leaves a shinier, longer-lasting finish than wax… and waxes will have difficulty adhering to RejeX! If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. Properties: High reflective property that can make any room appear larger. RejeX can be used over existing wax however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. The high gloss decorative laminates can be used for kitchen renovations and wardrobe makeovers. RejeX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. REJEX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES before it has cured, the contaminants may interfere with or embed in the protective film. If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaners, etc. It is important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. Curing is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to cross-link into a crystal-clear, impervious film. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 8-12 hours (depending on the humidity the higher the humidity, the faster the cure).

difference between rejex high gloss protective finish

If the surface is too hot, the coating can cure before it has properly bonded to the surface, so it may not perform up to its potential. When over 85° F, be sure to apply RejeX out of direct sunlight. Ideally, RejeX should be applied to a cool, dry, clean surface.

#Difference between rejex high gloss protective finish free#

RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting. It’s easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. It also makes graffiti easy to remove and can be applied to windshields to repel rain. This very thin film – less than a micron thick – prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. RejeX® is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. REJEX (pronounced rejects) is an advanced, ultra-slick coating system developed to give a high gloss finish that seals and protects painted surfaces, glass, metal, gel coat and acrylic. SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, RV, AIRPLANE & MOTORCYCLE















Difference between rejex high gloss protective finish